The short story

  • The display is normally in standby mode (see image below). All indicators are off in stand-bye mode and the display does not tell if the aircon is on or off (but you can probably hear it if it is on).
  • A short (<1 second) press on the home button to the right will lit up the panel and show its current settings. The air condition unit is turned off if the home button is not lit up (see image below).
  • If the aircon is off case press the home button longer (2-3 seconds) so the home button lights up (see image below). Clicking 2-3 seconds on the home button is how you turn on or off the aircon.
Aircon display in standby mode
Display active showing aircon is off
Display active showing aircon is on

The top knob adjust the fan speed, The lowest fan speed (I) is enough to cool down the unit to desired temperature. Increasing the fan speed make the system sligthly more noisy but does not change the temperature the system will aim for. Hence, lowest fan speed (I) is the best choice.

You also have the option of adjusting desired temperature using the larger bottom knob. Rotating it clockwise increase desired temperature and the other direction decreases it. Once you have adjusted the temperature the unit will gradually adapt to the new desired temperature. The temperature will not go below 23 degrees Celsius even if you set the desired temperature at the lowest value.

Always keep doors and windows shut when operating the air conditioning system. This is important!

A few units in Mantra Trilogy tower 1 have problems with the bearings in the fans. This makes them a bit noisy. We are aware of this problem and it will be adressed as soon as possible.

The long story

Cold water from a central rooftop facility is pumped down to each unit. A sensor and a valve within each unit decides to turn on or off cold water into the air conditioning system within the unit. Hence, the fan system within the unit always operates and circulates the air within the unit when the air conditioning system is turned on. However, it alternates between cooling the air during recirculation or to simply recirculate without cooling. The thermostat setting and the temperature sensor regulates this.

Setting it on the lowest fan speed (I) is usually efficient enough. Increasing the fan speed to medium (II) or high (III) may initially cool the unit marginally quicker but it will still not go below 23 degrees Celsius. A higher fan speed just creates more noise.

The air conditioning unit is serviced on a regular basis and is usually very reliable. It is usually a roof top issue affecting all units in the building those very few occasions where the air conditioning equipment fails. Please contact the reception if it fails to get the temperature down to around 23-24 degrees Celsius.

Keping doors or windows open while operating the air conditioning system means the air conditioning system will be overloaded with more warm and humid air than it can handle. It can cause technical problems and malfunction and also… …the unit stays warm and humid.. Hence, always have doors and windows closed while operating the air conditioning unit.