Each knob controls one dispenser of gas. A symbol inform which dispenser the knob controls.
To light the burner, turn the gas control knob to the High Flame setting of the burner to be lit, while at the same time depressing the gas control knob to activate the spark ignition.
Once the burner is alight continue to depress the gas control knob for 5 – 10 seconds to allow the flame safeguard to activate. If when you release the gas control knob, the burner flame goes out the flame safeguard has not heated up enough so repeat the ignition procedure after waiting 1 minute for gas to disperse.
Regulate the heat by turning the knob.
On finishing, turn control knob to off position marked with a black DOT.
